You need to pay close attention to the security of your garage door opener remote. You should not allow an intruder to get access to the contents of your garage or the home by not keeping some simple security tips.
Various radio frequencies enable communication between the opener and the remote. There are tiny switches that are called dip stitches that are used in adjusting the frequency that is used between these two components. It is critical to reconfigure the settings of the dip stitch to enhance the security of your garage.
A dip stitch is a small plastic block whose size is approximately half of a dice. They normally have the red and blue color with eight to ten white tiny switch levers that are positioned down and up. The garage door opener remote will only be able to communicate with the opener unit when the down/up switch matches on both devices. Making adjustments on the switch pattern allows you to modify the radio frequency that is used in communicating between these two devices.
You can locate the dip switch on the remote controller clicker and opener with a lot of ease. However, you may be forced to open up the remote system to locate the dip switch if it is not in the battery compartment. Unbolt the screws that are holding your garage door opener remote together and keenly pry it apart once you remove all the screws. After accessing the dip switch on your remote, scramble the positions of the switch and thereafter match them with the positions of the garage door openers dip switch block. How the pattern looks like does not matter as long as the pattern is random. This will make it very hard for someone to guess the pattern that was entered. The Complete Garage Doors can assist you with this stage if you are not sure of what is expected of you.
In case you do this and realize that the remote system is still not working, confirm whether the patterns of the dip switch are the same on both units. Also, cross check whether the battery of the remote is in a good condition. You also need to make sure that the garage door opener remote has power and is operating normally with the aid of the control panel that is inside the garage. Make sure you go through the manual if this does not still help in resolving the problem.
In case you are dealing with a new opener, it’s prudent to change the settings to make sure that everyone maintains honesty. Remember the installer and the people who work with him understand the settings of your frequency switch and you have to change them for security purposes. Remember to mix up the settings of the switch pattern and test whether it works.
Even if you employ professional to install your garage doors, you must learn how to make some modifications and enhance the security of your garage. It’s dangerous to stick to the default settings of the factory. Anyone can get access to your garage as long as he has a compatible remote. Don’t expose yourself to such risk.
This advice is also applicable to anyone who is renting or buying a new home. Just the way you change the locks of your door to make sure that spare keys don’t compromise the security of you home, you also need to look at garage door opener remote. You don’t know how many people lived in that house before you. After all, you just don’t want anyone to walk in your home or garage.