Without the right garage door maintenance, you might face costly repairs or replacement of the opener or door. Garage doors are large moving parts of the home, are operate severally in a day. Even though these parts have been constructed to last, even if the use is not intensive, maintenance and periodic care is needed. If you maintain the garage door regularly, keep the good work up and you will get rewards of a reliable, long-lasting door. If you are not doing the maintenance tasks of the garage door tune up Grand Rapids or having the door serviced, you can use the tips below to get started.
Even though some sections of the garage door that require professional serve are quite simple, you can handle them by yourself. Try to do an inspection of the system every six months from the inside out, look for loose hardware, rust, broken or bent parts, and cable wear. As you lower and raise the door, make observation on the operation of any jerks or hitches. Spray WD-40 on all rollers, tracks, latches, springs, and hinges.
Wipe them with a dry cloth and then apply household oil to lubricate them. Clean the outside and the inside of your door with a detergent. Apply car wax to the metal garage door as it helps in keeping the door clean and maintaining the finish. You can do this effectively by following the recommendations of the manufacturer. If the door is wood, start by applying fresh paint or a sealer every year. Finalize by checking the weather-stripping on the door and replace any one that has cracked.
Even though you can do some maintenance on the garage door, you will have to call a garage door tune up Grand Rapids professional company to perform the tasks. If the operation of the door is done by the torsion spring, periodic maintenance by a professional is critical for keeping the spring operational and free from rust. Failure of maintaining this system will result in an injury, damage, or breakage. Doors driven by chain also require the touch of a professional to lubricate the open mechanism properly.
Maintenance of the Automatic Door Opener
Garage door openers require garage door tune up Grand Rapids maintenance every year; but, you also have to do several tests on a monthly basis by yourself. The door reversing and optic sensor mechanism prevents accidents from happening and checks them for proper operation in a short time. Make use of a long-handed tool like a rake or broom and wave it between the door and the sensor as it is lowering. If they are working well, the door will reverse then re-open.
If you want to test the reversing system, put a log on the ground where the door usually hit and then close it. If it is working well, it will reverse and reopen after hitting the wood. Be keen to listen to unusual scrapping and grinding sound during the operation. Test the key pads and remote controls for proper functionality.