It is an important thing to think about the security of your remote and wireless garage door opener. intruders can get access to the contents of your garage or even your home if you don’t follow the security tips for your garage door opener remote Grand Rapids Mi.
Various radio frequencies are used to pass on communication between the garage door opener remote Grand Rapids Mi and the opener. There are tiny switches that are referred to as dip switches that are utilized in adjusting the frequency that is utilized between the two. It is a wise move to reconfigure the settings of the dip switch so as to enhance the security of your garage.
A dip switch is a tiny plastic block that is approximately the size of a dice that is cut halfway. They are normally colored red or blue with eight to ten tiny white switch levers that are placed in an up or down position. The garage door opener remote Grand Rapids Mi will be able to communicate with the opening unit when the down/up switch patterns match on the two devices. You will be changing the radio frequencies that are used in communicating between the two by making adjustments on the switch patterns.
You should be able to locate the dip switch on your garage door opener and also on the remote control clicker with a lot of ease. However, you may be forced to open the remote to get access to the dip switch if it is not in the battery compartment. Just remove the screws that hold the garage door opener remote Grand Rapids Mi together or pry it apart carefully if it has no screws. Once you have full access to the dip switch on your remote, go ahead and scramble the position of the switch before matching the positions on the garage door openers dip switch block. The look of the patter does not matter as long as you have a random pattern that no once can guess with a lot of ease.
In case you still have challenges to get your garage door opener remote Grand Rapids Mi working after this, verify if the patterns on the dip switch are similar on both units. Also confirm whether the battery of the remote is in a good working condition. The opener should also have power and it operates normally by using the control panel that is inside your garage. You can read the manual or seek assistance from Complete Garage Doors LLC if the system is not working yet.
If you have already gotten a new garage door opener or are thinking of acquiring one, the first thing you should think about is changing the settings. The most important thing is to make sure that you are dealing with honest people. Remember your installer and those people who are working with him know the settings of your frequency switch unless you adjust them. Make sure you mix up the settings of the switch and test that it is working well.
Make some changes even if you are installing the garage door opener by yourself. Staying with the default factory settings is risky because you don’t know how many people have them. Anyone with a compatible remote can drive down the street until he finds a door that can open. Make sure that you are not the victim in this case.
This advice is also applicable to people who are renting or buying a new home. Change the garage door opener remote Grand Rapids Mi lest you compromise the security of your new home. The home may have had several previous residences and you don’t know how many of them have access to the garage.