The garage door remains to be a piece of machinery that requires occasional tune up to function properly whether you are using an electronically operated model or low-tech mechanical model. Even top quality garage door can have problems with time dur to exposure to elements and heavy use. Garage door tune up Grand Rapids keeps the door function safely, quietly, and properly. This process should be done at least once every year using the following steps.
1st Step: Power Down
Safety comes top on your priority. Disconnect the electrical components of the garage door so that it will not turn on accidentally or start to function while you are continuing with the garage door tune up Grand Rapids process.
2nd Step: Search for Obvious Issues
Inspect the system of the garage door as you stock for any spots that could be having problems. You can diagnose some of the problematic areas such as checking whether the rollers are intact and in an excellent working condition with your eyes. You can also check whether the sealant or weather stripping around your garage door is still pliable. Make sure you replace any of these parts that appears to be damaged. Pay close attention to the weather stripping that is situated at the bottom of all steel doors. Some people call this piece a U-shaped astragal and is exposed to a lot of damage because it is practically pressed against the ground while shutting the door.
3rd Step: Replace the Weather Stripping and Lubricate the Door
This step is critical in the garage door tune up Grand Rapids process. Lubricate the metallic rollers using the right lubricant. You will also find alternative lubricants for non-metallic materials like vinyl or rubber. In case the weather stripping is brittle or cracked, all you need to do is replace it. Make sure you buy the right size of the weather stripping by measuring the length and width of your door. This step does not require any guess work and Complete Garage Doors LLC can help you out if you are not sure of what you are supposed to do.
4th Step: Look for any Misaligned Locking Bars
Misaligned locking bars is among the most common problems that call for garage door tune up Grand Rapids. This may cause issues when you are locking the door because the lock bar won’t slide smoothly into the door track slots. Loosen the screws that are on the guide brackets holding the lock bars to fix this issue. Use a hammer to tap the bars gently until they are aligned with the slots and then you can tighten the screws back. www.CompleteGarageDoorMi.com/ can also help you on this.
5th Step: Inspect all the Moving Parts
Inspect all the hinges, bolts, and hardware. By design, a garage door has several moving parts and they should be moving very freely. The challenge is that they can become loose over time. A screw driver can be used to tighten any loose bolts or screws during the garage door tune up Grand Rapids. The movement of some parts can also be restricted by the buildup of dirt or gunk. You can soak any gummy hardware in mineral spirits so as to clean them.
6th Step: Lubricate the Springs and Chains
This will keep your garage door closing and opening smoothly. Use a silicone-based spray to lubricate the springs so that they are kept in a good condition. Chains can be lubricated using any lithium grease product. Follow the manufacturer’s recommendations and don’t use the wrong lubrication product.
7th Step: Inspect the Tracks
Use a level to ensure that the tracks of the garage doors are perfectly vertically oriented. You need to conduct a professional just in case they need some adjustments.
8th Step: Make the Final Check
After garage door tune up Grand Rapids is done, open the garage doors halfway and leave it in that position to test it. A perfect one should be able to remain in that position on its own. If this is not the case, then the cables and springs are not properly balanced and you need to call a professional to adjust them. You may discover very small problems during the garage door tune up Grand Rapids process if you maintain your garage door on regular basis.